Gorenje ECS8P2 Información técnica descargar pdf (Pagina 18)

406342

millimeters from the lower surface of the worktop. The space

between the partition wall and the hob must be empty; no

objects should be placed into that gap.

• On the furniture back wall there should be a cutout with width

of at least 175 mm along the entire width of the furniture

element.

• Only type EVP4..,EVP2.., ovens ﬁ tted with a cooling fan may

be installed underneath this cooking hob.

Installation procedure

• The worktop should be installed completely horizontally.

• The cutoff surfaces should be appropriately protected.

• Attach the fastening elements (4x - SVK6…600 mm; 6x

- SVK7…750 mm; 6x - SVK8…850 mm) with the supplied

screws (4x - SVK6…600 mm; 6x - SVK7…750 mm; 6x

- SVK8…850 mm) to the left and right wall of the cooking hob

and the worktop cutoff.

• Connect the cooking hob to the power mains (see instructions

for connecting a cooking hob on a power network).

• Insert the cooking hob into he cutoff and press it heavily from

above against the worktop.

• For screwing down the ﬁ xing clip it is not allowed to use

screws longer than 6,5 mm.

• The appliance may only be connected by an authorized skilled technician.

• Electric system protection should comply with all relevant regulations.

• The connection clips can be accessed when the connection clip covers are opened / removed.

• Before connecting the appliance, make sure the voltage indicated on the rating plate is consistent

with the voltage in your home circuit.

• The rating plate with basic information is attached on the lower side of the hob.

• The electric circuit should also include an omnipolar switch that will separate the appliance from

the mains, if required, with at least 3 mm of distance between contacts. Suitable devices include

fuses, current protection switches, etc.

• The connection should be selected according to the installation possibilities with regard to current

and fuses.

• Given the protection from the risk of ﬁ re, appliances of this type may be installed in a worktop

next to a piece of kitchen furniture that is taller than the appliance (when installed); however, in

this case, a kitchen furniture not higher than the cooking hob must be installed on the other side,

adjacent to the appliance.

• The current conducting and isolated parts must be protected from any possibility of direct contact.

Important warnings

Connecting the appliance to the power mains

1 2 ... 13 14 15 16 17 18 19 20

Sin comentarios

Gorenje ECS8P2 Información técnica Pagina 18